Using Centreon el7 ISO¶
Step 1: Starting up the server¶
To install Centreon, start up your server from the Centreon ISO image in version el7. Start up with Install CentOS 7:
Step 2: Choosing a language¶
Choose the language for the installation process and click on Continue:
Step 3: Selecting components¶
Click on the Installation Type menu:
You have different options to choose from:
After selecting your installation type, click Done.
Step 4: System configuration¶
Partitioning the disk¶
Click on the Installation Destination menu:
Select the hard disk drive and the I will configure partitioning option. Then click on Done:
Using the + button, create your own partitioning file system following the instructions in documentation prerequisites. Then click on Done:
It is recommended to use LVM as the default partitioning scheme.
A confirmation window appears. Click on Accept Changes to validate the partitioning:
Configuring the timezone¶
Click on the Date & Time menu:
Select the time zone and then click the gear button to configure the NTP server:
Type in the name of the NTP server you wish to use and click the plus button. Or, select one from the list of predefined NTP servers then click OK and then Done:
It is okay that you can’t enable the “network time” option in this screen. It will become enabled automatically when you configure the network and hostname.
Configuring the network¶
Click on the Network & Hostname menu:
Enable all network interfaces by clicking the button in the top right from off to on. Then click on Done:
Beginning the installation¶
Once configuration is complete, click on Begin Installation:
Click on Root Password:
Define and confirm the root user password. Click on Done:
Wait for the installation process to finish. You can also use this time to add additional users to the system if you desire.
When the installation is complete, click on Reboot:
Updating the system packages¶
- Connect to your server using a terminal, and execute the command:
# yum update
Accept all GPG keys if you are prompted:
- Then restart your server with the following command:
To get the IP address of your Centreon server, uses the command:
# ip addr
Log in to Centreon web interface via the URL: http://[SERVER_IP]/centreon. The Centreon setup wizard is displayed. Click on Next.
The Centreon setup wizard checks the availability of the modules. Click on Next.
Click on Next.
Click on Next.
Provide the information on the admin user, then click on Next.
By default, the localhost server is defined and the root password is empty. If you use a remote database server, change these entries. In this case, you only need to define a password for the user accessing the Centreon databases, i.e., Centreon. Click on Next.
If the “Add innodb_file_per_table=1 in my.cnf file under the [mysqld] section and restart MySQL Server.” error message appears, perform the following operations:
Log in to the root user on your server.
Modify this file:
Add these lines to the file:
Restart the mysql service:
# systemctl restart mysql
Click on Refresh.
The Centreon setup wizard configures the databases. Click on Next.
You will now be able to install the Centreon server modules.
Click on Install.
Once installation is complete, click on Next.
At this point, an advertisement informs you of the latest Centreon news and products. If your platform is connected to the internet, the information you receive will be up to date. If you are not online, only information on the current version will be displayed.
The installation is complete. Click on Finish.
You can now log in.
Initialization of the monitoring¶
To start the monitoring engine:
From your web interface, go to Configuration > Pollers.
Keep the default options and click on Export configuration.
Select Central poller from the box input Pollers.
Uncheck Generate Configuration Files and Run monitoring engine debug (-v).
Check Move Export Files and Restart Monitoring Engine with the Restart option selected.
Click on Export again.
Log on to the root user on your server.
Start Centreon Broker:
# systemctl start cbd
Start Centreon Engine:
# systemctl start centengine
# systemctl start centcore
# systemctl start centreontrapd
Monitoring is now working. You can begin monitoring your IT system.
To automatically start services at system bootup, run these commands on the central server:
# systemctl enable centcore # systemctl enable centreontrapd # systemctl enable cbd # systemctl enable centengine # systemctl enable centreon
Installation of available extensions¶
Go to Administration > Extensions > Manager menu and click on Install all: