Monitoring checks list

Infrastructure services monitoring

Infra-ActiveDirectory-NRPE

Template to check Windows Active Directory Domain Controller using NRPE protocol

Name Description
Ad-Domain-Controller This check makes to diagnose the domain controller. It executes the command “dcdiag” .

Infra-POP

Template to check a POP system

Name Description
POP Check the availability of the POP service for a specific address.

Infra-SSH

Template to check a SSH system

Name Description
SSH Check the availability of the SSH service for a specific address.

Operating systems monitoring

OS-AIX-SNMP

Template to check AIX server using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Swap Check virtual memory usage (SWAP)
Process-Generic Check Linux process/service is working.
Disk-Generic-Id Check the rate of free space on the disk. For each checks the name of the disk will appear (« label ») rather than the letter assigned. Thresholds can be in percentage or in free space remaining.
Disk-Generic-Name Check the rate of free space on the disk. For each checks the mount pont of the disk will appear (« label »). Thresholds can be in percentage or in free space remaining.
Disk-Global Check the rate of free space on disks. For each checks the mount point of disks will appear (« label »). Thresholds can be in percentage or in free space remaining.
Traffic-Generic-Id Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Generic-Name Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Global Check the bandwidth of interfaces. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Time Check NTP synchronization

OS-AS400

Template to check AS/400 server using Centreon-Connector-as400 protocol

Name Description
Asp1-Usage Check the occupation rate of ASP1.Report a OK state if the occupation rate is below the threshold WARNING.Report a WARNING state if the occupation rate is above the threshold WARNING.Report a CRITICAL state if the occupation rate is above the threshold CRITICAL.
CPU-Usage Check the time during which the CPU AS/400 were used.Report a OK state if the time CPU is below the threshold WARNING.Report a WARNING state if the time CPU pass above the threshold WARNING.Report a CRITICAL state if the time CPU pass above the threshold CRITICAL.It may exceed 100% on the uncapped partition.
Disk-State Check running state of whole physical disks.Physical disk can take statements: no control, active; failed, hardware failure, rebuild, not ready, protected, busy, not operational, unknown state (13 states in total).Report a OK state if all disks are active.Report a CRITICAL state if at least one disk is in different state from active.
Disk-Usage-Repartition Compare utilization rate of different physical disks.Calculate the gap between minimum utilization rate and maximum whole physical disks.Report a OK state if the gap is below the threshold WARNING.Report a WARNING state if the gap is above the threshold WARNING.Report a CRITICAL state if the gap is above the threshold CRITICAL.
Page-Fault Check page fault rate.Recover page rate per second and page fault rate per second, database and no database.Calculate the percentage of page fault in relation to the page.Report a OK state if the percentage is below the threshold WARNING.Report a WARNING state if the percentage is above the threshold WARNING.Report a CRITICAL state if the percentage is above the threshold CRITICAL.
Disk-Usage Check occupation rate of physical disk.Report a OK state if the occupation rate is below the threshold WARNING.Report a WARNING state if the occupation rate is above the threshold WARNING.Report a CRITICAL state if the occupation rate is above the threshold CRITICAL.
Job-Exist Check job existence. Indicator don’t check is state.Report a OK state if the job exist.Report CRITICAL if the job doesn’t exist.
Job-Has-No-Msgw Check job existence. Check job hasn’t a MSGW.Report OK state if the job exist.Report CRITICAL state if the job doesn’t exist, or job has a MSGW.
Job-Queue-Status Check job queue existence and state.Job queue can take statements RELEASED or HELD.Report a OK state if the job queue is in RELEASED state.Report a CRITICAL state if the job queue is in HELD state or not existing.
Job-Queue-Wait-Job-Count Check the number of job waiting in a job queue ignoring priorities of jobs.Jobs in job queue can take different statements: ACTIVE, HELD or SCHEDULED.Report a OK state if the number of job in HELD state is lower than the threshold WARNING.Report a WARNING state if the number of job in HELD state is above the threshold WARNING.Report a CRITICAL state if the number of job in HELD state is above the threshold CRITICAL.
Message-Queue-Size Check messages queue size.Recover all the message whose the severity is superior or equal to the define arguments.Report a OK stage if the number of message is below the threshold WARNING.Report a WARNING state if the number of message is above the threshold WARNING.Report a CRITICAL state if the number of message is above the threshold CRITICAL.
SubSystem-Exist Check the presence and the state of a subsystem.A subsystem can take statements ACTIVE, ENDING, INACTIVE, RESTRICTED, and STARTING.Report a OK state if the subsystem state is ACTIVE.Report a CRITICAL state if the subsystem state is different than ACTIVE, or the subsystem wasn’t found.
Job-Has-No-Msgw Check job existence. Check job hasn’t a MSGW.Report OK state if the job exist.Report CRITICAL state if the job doesn’t exist, or job has a MSGW.
Message-Queue-Filtered-Size Check messages queue size.Recover all the message whose the severity is superior or equal to the define arguments.Report a OK stage if the number of message is below the threshold WARNING.Report a WARNING state if the number of message is above the threshold WARNING.Report a CRITICAL state if the number of message is above the threshold CRITICAL.
Jobs-Have-No-Msgw-In-SubSystem Check job existence. Check job hasn’t a MSGW.Report OK state if the job exist.Report CRITICAL state if the job doesn’t exist, or job has a MSGW.
Job-Running-In-Subsystem Check job existence. Check job hasn’t a MSGW.Report OK state if the job exist.Report CRITICAL state if the job doesn’t exist, or job has a MSGW.
Job-In-Subsystem Check job existence. Check job hasn’t a MSGW.Report OK state if the job exist.Report CRITICAL state if the job doesn’t exist, or job has a MSGW.
Message-Queue-New-Message Check messages queue size.Recover all the message whose the severity is superior or equal to the define arguments.Report a OK stage if the number of message is below the threshold WARNING.Report a WARNING state if the number of message is above the threshold WARNING.Report a CRITICAL state if the number of message is above the threshold CRITICAL.

OS-FreeBSD-SNMP

Template to check FreeBSD server using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Load Check the server load average.
Memory Check the rate of the utilization of memory (RAM).
Swap Check virtual memory usage (SWAP)
Disk-Generic-Id Check the rate of free space on the disk. For each checks the name of the disk will appear (« label ») rather than the letter assigned. Thresholds can be in percentage or in free space remaining.
Disk-Generic-Name Check the rate of free space on the disk. For each checks the mount pont of the disk will appear (« label »). Thresholds can be in percentage or in free space remaining.
Disk-Global Check the rate of free space on disks. For each checks the mount point of disks will appear (« label »). Thresholds can be in percentage or in free space remaining.
Disk-IO Check access disk of the disk. For each check the name of the disk will appear “label” rather than the letter assigned.
Process-Generic Check Unix process/service is working.
Traffic-Generic-Id Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Generic-Name Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Global Check the bandwidth of interfaces. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Uptime Time since the server has been working and available.

OS-Hpux-SNMP

Template to check HP-UX server using SNMP protocol

Name Description
Cpu Check system CPUs.
Load Check the server load average.
Memory Check the rate of the utilization of memory (RAM) and swap.
Storage-Global Check the rate of free space on disks. Thresholds can be in percentage or in free space remaining.
Process-Generic Check process.
Uptime Time since the server has been working and available.

OS-Linux-SNMP

Template to check Linux server using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Load Check the server load average.
Memory Check the rate of the utilization of memory (RAM).
Swap Check virtual memory usage (SWAP)
Process-Generic Check Linux process/service is working.
Disk-IO Check access disk of the disk. For each check the name of the disk will appear “label” rather than the letter assigned.
Uptime Time since the server has been working and available.
Traffic-Global Check the bandwidth of interfaces. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Generic-Id Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Generic-Name Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Disk-Global Check the rate of free space on disks. For each checks the mount point of disks will appear (« label »). Thresholds can be in percentage or in free space remaining.
Disk-Generic-Id Check the rate of free space on the disk. For each checks the name of the disk will appear (« label ») rather than the letter assigned. Thresholds can be in percentage or in free space remaining.
Disk-Generic-Name Check the rate of free space on the disk. For each checks the mount pont of the disk will appear (« label »). Thresholds can be in percentage or in free space remaining.
Cpu-Detailed Check the detailed rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Packet-Errors-Generic-Id Check packets on errors/discards of a network interface.
Packet-Errors-Generic-Name Check packets on errors/discards of a network interface.
Packet-Errors-Global Check packets on errors/discards of multiple network interfaces.
Inodes-Global Check Inodes space usage on partitions.
Tcpcon-Generic Check current tcp connections.

OS-Solaris-SNMP

Template to check Solaris server using SNMP protocol

Name Description
Cpu-Detailed Check the detailed rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Load Check the server load average.
Disk-Generic-Id Check the rate of free space on the disk. For each checks the name of the disk will appear (« label ») rather than the letter assigned. Thresholds can be in percentage or in free space remaining.
Disk-Generic-Name Check the rate of free space on the disk. For each checks the mount pont of the disk will appear (« label »). Thresholds can be in percentage or in free space remaining.
Disk-Global Check the rate of free space on disks. For each checks the mount point of disks will appear (« label »). Thresholds can be in percentage or in free space remaining.
Packet-Errors-Generic-Id Check packets on errors/discards of a network interface.
Packet-Errors-Generic-Name Check packets on errors/discards of a network interface.
Packet-Errors-Global Check packets on errors/discards of multiple network interfaces.
Process-Generic Check Linux process/service is working.
Traffic-Generic-Id Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Generic-Name Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Global Check the bandwidth of interfaces. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Uptime Time since the server has been working and available.

OS-Windows-NRPE

Template to check Windows server using NRPE protocol (NSClientpp 0.4.3)

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Disks Check Windows disk usage.
Memory Check the rate of the utilization of memory (RAM)
Services-Auto Check that all auto-start services are running.
Disks Check Windows disk usage.
Swap Check the rate of the utilization of virtual memory (SWAP)
Counter-Generic Check the rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Process-generic Checks processes (state, memory size, numbers,...).
Files-Generic Check files/directories (size, last access,...).
Eventlog-Generic Check eventlogs errors.
Active-Sessions Check active sessions.
Logfiles-Generic Check log files.
Ntp Check the synchronization with an NTP server.
Services-Generic-Name Check windows services states.
Task-Generic Check windows scheduled task.
Uptime Check windows uptime.

OS-Windows-SNMP

Template to check Windows server using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Memory Check the rate of the utilization of memory (RAM) and the paging file. The paging file is a partial copy of the RAM in the form of file, allowing to release the memory by copying in the file the less used elements.
Swap Check the rate of the utilization of virtual memory (SWAP)
Process-Generic Check if Windows process are started.
Service-Generic Check if Windows services are started.
Traffic-Generic-Id Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Disk-Generic-Name Check the rate of free space on the disk. For each checks the name of the disk will appear (« label ») rather than the letter assigned. Thresholds can be in percentage or in free space remaining.
Uptime Check the uptime of the Windows server since the last reboot. It’s just an indication with no threshold
Traffic-Generic-Name Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Global Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Disk-Global Check the rate of free space on the disk. For each checks the name of the disk will appear (« label ») rather than the letter assigned. Thresholds can be in percentage or in free space remaining.
Disk-Generic-Id Check the rate of free space on the disk. For each checks the name of the disk will appear (« label ») rather than the letter assigned. Thresholds can be in percentage or in free space remaining.

OS-Windows-WMI

Template to check Windows server using WMI protocol

Name Description
Boot-Services Check the state of all services which are started at boot
CPU Check the rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Disk-C Check the rate of free space in disk C. Thresholds can be in percentage or in free space remaining.
Physical-Memory Check the utilisation of the Physical memory for the Windows Server
Virtual-Memory Check the utilisation of the Virtual memory for a Windows Server
Process-Generic Check if Windows process are started.
Service-Generic Check if Windows services are started.
Uptime Check the uptime of the Windows server since the last reboot. It’s just an indication with no threshold
Traffic-Generic Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Disk-Generic Check the rate of free space on the disk. For each checks the name of the disk will appear (« label ») rather than the letter assigned. Thresholds can be in percentage or in free space remaining.

Network equipments monitoring

Net-3com-SNMP

Template to check 3com devices using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine.
Hardware-Global Check hardware.
Memory Check the rate of the utilization of memories.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.

Net-Cisco-Ironport-SNMP

Template to check Cisco Ironport devices using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine.
Hardware-Global Check hardware (raids, power supplies).
Memory Check memory usage.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.

Net-Cisco-Standard-SNMP

Template to check Cisco devices (2800, 2900, 3750, Nexus,...) using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average utilization rate of CPU.
Environment Check hardware environment (Fans, Power Supplies, Temperatures, Voltages).
Memory Check machine memory usage.
Stack Check Cisco “Stack” state.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Generic-Id Check traffic of an network interface.
Spanning-Tree Check Spanning Tree state on interfaces.
Traffic-Global Check traffic of multiple network interfaces.
Packet-Errors-Generic-Id Check packets on errors/discards of a network interface.
Packet-Errors-Generic-Name Check packets on errors/discards of a network interface.
Packet-Errors-Global Check packets on errors/discards of multiple network interfaces.
Ipsla Check RTT Controls.
Hsrp Check Cisco HSRP status.
Anycast Check traffic types (unicast, broadcast, multicast) of multiple network interfaces.

Net-Cisco-Voice-Gateway-SNMP

Template to check Cisco Voice Gateway devices using SNMP protocol

Name Description
Isdn-Usage-Global Check ISDN channel usages.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.

Net-Cisco-WaaS-SNMP

Template to check Cisco Waas using SNMP protocol

Name Description
Sessions-Tfo Check returning number of TCP connection in passthrough and optimized state with Cisco WaaS tool.

Net-Cisco-Wlc-SNMP

Template to check Cisco Wireless Lan Controller using SNMP protocol

Name Description
Hardware-Global Check all hardware (power supplies).
Cpu Check CPU usage.
Memory Check the rate of the utilization of memory (RAM).
Ap-Status-Global Check status of all access points.
Ap-Channel-Interference-Global Check channel interferences of all access points.
Ap-Channel-Noise-Global Check channel noises of all access points.
Ap-Users Check total users of all access points.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.

Net-Dell-6200

Template to check Dell 6200 series using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average utilization rate of CPU.
Environment-Global Check hardware status (‘fan’, ‘temperature’, ‘power supply’).
Memory Check equipment memory usage.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.
Environment-Fan Check fan status on hardware.
Environment-Temperature Check temperature sensors of hardware.
Environment-Psu Check power supply status on hardware.
Global-Status Check global status and indicate generic information of the equipment.

Net-Dell-n4000

Template to check Dell n4000 series using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average utilization rate of CPU.
Environment-Global Check hardware status (‘fan’, ‘temperature’, ‘power supply’).
Memory Check equipment memory usage.
Environment-Fan Check fan status on hardware.
Environment-Psu Check power supply status on hardware.
Environment-Temperature Check temperature sensors of hardware.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.
Global-Status Check global status and indicate generic information of the equipment.

Net-Dell-Sseries-SNMP

Template to check Dell S-Series devices using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine.
Hardware-Global Check hardware.
Memory Check the rate of the utilization of memories.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.

Net-Digi-AnywhereUSB-SNMP

Template to check Digi AnywhereUSB devices using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU.
Memory Check the rate of the utilization of memory (RAM).
Traffic-Global Check traffic of multiple network interfaces.

Net-Digi-Portserverts-SNMP

Template to check Digi PortServer TS devices using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU (between 0 and 255).
Memory Check the rate of the utilization of memory (RAM).
Traffic-Global Check traffic of multiple network interfaces.

Net-Extreme-SNMP

Template to check Extreme Networks devices using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine.
Hardware-Global Check hardware (‘fan’, ‘power supply’, ‘slot’).
Memory Check the rate of the utilization of memories.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.
Stack Check stack status.

Net-FW-Arkoon-SNMP

Template to check Arkoon firewall using SNMP protocol

Name Description
Uptime Get uptime.
Memory Check memory usage.
Load Check CPU usage.
Swap Check virtual memory usage (SWAP)
Traffic-Global Check traffic of multiple network interfaces.
Traffic-Generic-Name Check traffic of an network interface.
Process-Generic Check Arkoon process/service is working.
Packet-Errors-Generic-Name Check packets on errors/discards of a network interface.
Packet-Errors-Global Check packets on errors/discards of multiple network interfaces.

Net-FW-Checkpoint-SNMP

Template to check Checkpoint firewall using SNMP protocol

Name Description
Memory Check memory usage.
Cpu Check CPU usage.
Connections Check connections number.
HA-State Check HA State.
Hardware Check hardware components health.

Net-FW-Cisco-Asa-SNMP

Template to check Cisco Asa Firewall using SNMP protocol

Name Description
Sessions Check current/average connections.
Cpu Check the rate of utilization of CPU for the machine. This check can give the average utilization rate of CPU.
Memory Check machine memory usage.
Failover Check failover status.
Packet-Errors-Generic-Id Check packets on errors/discards of a network interface.
Packet-Errors-Generic-Name Check packets on errors/discards of a network interface.
Packet-Errors-Global Check packets on errors/discards of multiple network interfaces.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.

Net-Juniper-MAG

Template to check Juniper MAG using SNMP protocol

Name Description
CPU Check the rate of utilization of CPU for the machine. This check can give the average utilization rate of CPU.
Memory Check machine memory usage.
Logfile Check log file usage.
Swap Check machine swap usage.
Blade-Temperature Check current blade temperature.
Traffic-Generic-ID Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Generic-Name Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Global Check the bandwidth of interfaces. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Users Check current connected users.
Disk Check disk usage

Net-Juniper-SA

Template to check Juniper SA using SNMP protocol

Name Description
CPU Check the rate of utilization of CPU for the machine. This check can give the average utilization rate of CPU.
Logfile Check log file usage.
Memory Check machine memory usage.
Swap Check machine swap usage.
CPU-Detailed Check the rate of utilization of CPU for the machine. This check can give the average utilization rate of CPU.
Disk Check disk usage.
Users Check current connected users.
Traffic-Generic-ID Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Generic-Name Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Global Check the bandwidth of interfaces. For each checks the name of the interface will appear (« label » shortcut describing the interface).

Net-Juniper-SRX

Template to check Juniper SRX using SNMP protocol

Name Description
Hardware Check hardware.
Cpu-Routing Check CPU Usage of routing engine.
Cpu-Forwarding Check CPU Usage of packet forwarding engine.
Memory-Routing Check Memory Usage of routing engine.
Memory-Forwarding Check Memory Usage of packet forwarding engine.
Flow-Sessions Check Packet Forwarding Engine sessions usage.
Cp-Sessions Check CP (‘central point’) sessions usage.
Traffic-Generic-Id Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Generic-Name Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Global Check the bandwidth of interfaces. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Disk-Generic-Id Check the rate of free space on the disk (use the ID). Thresholds can be in percentage or in free space remaining.
Disk-Generic-Name Check the rate of free space on the disk (use the Name. Difficult to use: prefer ‘Id’ or ‘Global’ to filter). Thresholds can be in percentage or in free space remaining.
Disk-Global Check the rate of free space on the disk (use the Name. Difficult to use: prefer ‘Id’ or ‘Global’ to filter). Thresholds can be in percentage or in free space remaining.

Net-Juniper-SSG

Template to check Juniper SSG using SNMP protocol

Name Description
Sessions Check current active sessions.
Cpu Check the rate of utilization of CPU for the machine. This check can give the average utilization rate of CPU.
Memory Check machine memory usage.
Hardware Check hardware.
Traffic-Generic-Id Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Generic-Name Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Global Check the bandwidth of interfaces. For each checks the name of the interface will appear (« label » shortcut describing the interface).

Net-Fortinet-Fortigate-SNMP

Template to check Fortinet Fortigate using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average utilization rate of CPU.
Memory Check memory usage.
Sessions Check current active sessions.
Hardware Check hardware sensors.
Virus-Global Check blocked and detected virus on multiple virtual domains.
Virus-Name Check blocked and detected virus on a virtual domain.
Traffic-Global Check traffic of multiple network interfaces.
Traffic-Name Check traffic of an network interface.
Traffic-Id Check traffic of an network interface.
Disk Check system disk usage.
Cluster-Status Check cluster status.
Ips-Stats-Global Check virtual domain IPS statistics.

Net-PaloAlto-Standard-SNMP

Host Template to check Palo Alto Firewall using SNMP protocol

Name Description
Cpu Check CPU Utilization.
Hardware Check hardware components health through standard RFC MIB.
Sessions Check sessions.
Packet-Errors Check packets on errors/discards of multiple network interfaces.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.
Cluster-Status Check Cluster status.
Panorama Check panorama connection status.

Net-FW-Pfsense-SNMP

Template to check Pfsense firewall using SNMP protocol

Name Description
Blocked-Packets-Global Check count of packets blocked on multiple network interfaces.
Memory-Dropped-Packets Check count of packets dropped due to memory limitations.
Runtime Time since Pfsense service has been runing and available.
Blocked-Packets-ID Check count of packets blocked on network interface.
Blocked-Packets-ID Check count of packets blocked on network interface.

Net-Stonesoft-SNMP

Template to check Stonesoft Firewall using SNMP protocol

Name Description
Memory Check the rate of the utilization of memory.
Cpu Check the rate of utilization of CPU.
Rejected-Packets Check count of rejected packets.
Dropped-Packets Check count of dropped packets.
Connections Check connections.
Disk-Global Check the rate of utilization on disks.
Disk-Name Check the rate of utilization on disks.
Cluster-State Check the state of the cluster.
Cluster-Load Check the load of the cluster.
Traffic-Global Check the bandwidth of the interface.
Traffic-Generic-Name Check the bandwidth of the interface.
Traffic-Generic-ID Check the bandwidth of the interface.

Net-Bluecoat-SNMP

Template to check Bluecoat using SNMP protocol

Name Description
Client-Connections Check current client connections on Bluecoat.
Client-Requests Check current http client requests on Bluecoat.
Client-Traffic Check bytes/s received/delivered to clients on Bluecoat.
Cpu Check CPU usage on Bluecoat.
Hardware Check hardware sensors on Bluecoat.
Memory Check memory usage on Bluecoat.
Server-Connections Check current server connections on Bluecoat.
Disk Check disk usage on Bluecoat.

Net-H3C-SNMP

Template to check H3C devices using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine.
Hardware-Global Check hardware.
Memory Check the rate of the utilization of memories.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.

Net-Hp-Vc-SNMP

Template to check HP VC (Virtual Connect) Switches using SNMP protocol

Name Description
Hardware-Global Check hardware.
Traffic-Global Check traffic of multiple network interfaces.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.

Net-Juniper-Ggsn-SNMP

Template to check GGSN module of Juniper-Ericsson using SNMP protocol

Name Description
Global-Stats Check global statistics (added stats from all APN).
Apn-Stats-Global Check statistics by APN.

Net-Juniper-Trapeze-SNMP

Template to check Juniper Trapeze using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine.
Memory Check memory usage.
Ap-Users Check the number of users (by SSID, by AP).
Ap-Status Check AP status.

Net-F5-Bigip-SNMP

Template to check F5 BIG-IP equipments using SNMP protocol

Name Description
Virtualserver-Status-Global Check virtual servers status.
Connections Check current connections.
Hardware-Global Check hardware status (‘fan’, ‘temperature’, ‘power supply’).
Node-Status-Global Check nodes status.
Pool-Status-Global Check pools status.
Hardware-Fan Check fan status on hardware.
Hardware-Psu Check fan status on hardware.
Hardware-Temperature Check hardware temperatures.
Failover Check failover status.

Net-Kemp-SNMP

Template to check Kemp devices using SNMP protocol

Name Description
Cpu-Detailed Check the detailed rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Load Check the server load average.
Memory Check the rate of the utilization of memory (RAM).
Virtualserver-Status-Global Check virtual servers status.
Traffic-Generic-Id Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Generic-Name Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Global Check the bandwidth of interfaces. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Reallserver-Status-Global Check real servers status.
Ha-Status Check HA status.

Net-Citrix-Netscaler-MPX8000-SNMP

Template to check Citrix Netscaler MPX8000 Series using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average utilization rate of CPU.
Memory Check machine memory usage.
Health Check hardware environment (Fanspeed, Power Supplies, Temperatures, Voltages).
Storage Check the rate of utilization of storages.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.
Ha-State Check High Availability Status.
Vserver-Status-Generic-Name Check a vserver status and health.
Vserver-Status-Global Check vservers status and health.

Net-Netasq-SNMP

Template to check Netasq devices using SNMP protocol

Name Description
Cpu-Detailed Check the detailed rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Load Check the server load average.
Memory Check the rate of the utilization of memory (RAM).
Swap Check virtual memory usage (SWAP)
Cpu Check the rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Disk-Global Check the rate of free space on disks. For each checks the mount point of disks will appear (« label »). Thresholds can be in percentage or in free space remaining.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.
Ha-Status Check HA status.
Vpn-Status Check VPN states.

Net-Oneaccess-SNMP

Template to check OneAccess devices using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine.
Memory Check the rate of the utilization of memory (RAM).
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.

Net-Nortel-Standard-SNMP

Template to check Nortel devices using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average utilization rate of CPU.
Hardware-Global Check hardware status.
Memory Check memory usage.
Packet-Errors-Generic-Id Check packets on errors/discards of a network interface.
Packet-Errors-Generic-Name Check packets on errors/discards of a network interface.
Packet-Errors-Global Check packets on errors/discards of multiple network interfaces.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.

Net-Ruggedcom-SNMP

Template to check Ruggedcom devices using SNMP protocol

Name Description
Hardware-Global Check all sensors (‘fan’, ‘power supply’).
Memory Check the rate of the utilization of memory (RAM).
Temperature Check hardware temperature.
Errors Check hardware errors.
Traffic-Generic-Id Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Generic-Name Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Global Check the bandwidth of interfaces. For each checks the name of the interface will appear (« label » shortcut describing the interface).

Net-Riverbed-Steelhead-SNMP

Template to check Riverbed Steelhead devices using SNMP protocol

Name Description
Temperature Check the temperature for the machine.
Bandwidth-Optimization Check total optimized bytes across all application ports.
Bandwidth-Passthrough Check passthrough bandwidth in both directions.
Connections Check connections.
Disk-Utilization Check disk usage.
Health Check the current health of the system.
Load-Average Check system load-average.
Service-Status Check the current status of the optimization service.
Service-Uptime Check uptime of optimization service.

Net-Atrica-SNMP

Template to check Atrica devices using SNMP protocol

Name Description
Connections-Generic-Name Check traffic (‘cir’, ‘eir’) of an network connection.
Connections-Generic-Id Check traffic (‘cir’, ‘eir’) of an network connection.
Connections-Global Check traffic (‘cir’, ‘eir’) of multiple network connections.

Net-Juniper-Mseries-SNMP

Template to check Juniper M Series using SNMP protocol

Name Description
Cpu-Routing Check CPU Usage of routing engine.
Hardware Check hardware.
Memory-Routing Check Memory Usage of routing engine.
Disk-Generic-Id Check the rate of free space on the disk (use the ID). Thresholds can be in percentage or in free space remaining.
Disk-Generic-Name Check the rate of free space on the disk (use the Name. Difficult to use: prefer ‘Id’ or ‘Global’ to filter). Thresholds can be in percentage or in free space remaining.
Disk-Global Check the rate of free space on the disk (use the Name. Difficult to use: prefer ‘Id’ or ‘Global’ to filter). Thresholds can be in percentage or in free space remaining.
Traffic-Generic-Id Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Generic-Name Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Global Check the bandwidth of interfaces. For each checks the name of the interface will appear (« label » shortcut describing the interface).

Net-Redback-SNMP

Template to check Redback devices using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine.
Disk-Usage-Global Check disk usages.
Memory Check the rate of the utilization of memories.
Hardware-Global Check hardware (‘fan’, ‘power supply’, ‘temperature’, ‘voltage’, ‘disk’).
Packet-Errors-Generic-Id Check packets on errors/discards of a network interface.
Packet-Errors-Generic-Name Check packets on errors/discards of a network interface.
Packet-Errors-Global Check packets on errors/discards of multiple network interfaces.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.

Net-Alcatel-OmniSwitch-6850

Template to check Alcatel OmniSwitch 6850 using SNMP protocol

Name Description
Cpu Check CPU usage.
Flash-Memory Check Flash memory usage.
Hardware Check hardware state.
Memory Check memory usage.
Spanning-Tree Check Spanning Tree state on interfaces.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.
Packet-Errors-Generic-Id Check packets on errors/discards of a network interface.
Packet-Errors-Generic-Name Check packets on errors/discards of a network interface.
Packet-Errors-Global Check packets on errors/discards of multiple network interfaces.

Net-Aruba-Standard-SNMP

Template to check Aruba devices using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average utilization rate of CPU.
Memory Check machine memory usage.
Storage Check storage device usages.
Hardware-Global Check hardware status (‘fan’, ‘module’, ‘power supply’).
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.
Packet-Errors-Global Check packets on errors/discards of multiple network interfaces.
Packet-Errors-Generic-Id Check packets on errors/discards of a network interface.
Packet-Errors-Generic-Name Check packets on errors/discards of a network interface.
Hardware-Fan Check fan status on hardware.
Hardware-Module Check module status on hardware.
Hardware-Psu Check power supply status on hardware.
Ap-Connections Check AP connections.
Ap-Users Check users connected.

Net-Brocade-SNMP

Template to check Brocade switch using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine.
Hardware Check hardware state.
Memory Check memory usage.
Traffic-Generic-ID Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Generic-Name Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Global Check the bandwidth of interfaces. For each checks the name of the interface will appear (« label » shortcut describing the interface).

Net-Cisco-Sb-Standard-SNMP

Template to check Cisco Smallbusiness using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average utilization rate of CPU.
Environment Check hardware environment (Fans, Power Supplies).
Packet-Errors-Generic-Id Check packets on errors/discards of a network interface.
Packet-Errors-Generic-Name Check packets on errors/discards of a network interface.
Packet-Errors-Global Check packets on errors/discards of multiple network interfaces.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.
Spanning-Tree Check Spanning Tree state on interfaces.

Net-Hp-Procurve-SNMP

Template to check HP Procurve Switches using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine.
Memory Check machine memory usage.
Environment Check hardware environment (Fans, Power Supplies, Temperatures).
Traffic-Global Check traffic of multiple network interfaces.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.

Net-Juniper-EX

Template to check Juniper Ex using SNMP protocol

Name Description
Cpu-Routing Check CPU Usage of routing engine.
Hardware Check hardware.
Memory-Routing Check Memory Usage of routing engine.
Disk-Generic-Id Check the rate of free space on the disk (use the ID). Thresholds can be in percentage or in free space remaining.
Disk-Generic-Name Check the rate of free space on the disk (use the Name. Difficult to use: prefer ‘Id’ or ‘Global’ to filter). Thresholds can be in percentage or in free space remaining.
Disk-Global Check the rate of free space on the disk (use the Name. Difficult to use: prefer ‘Id’ or ‘Global’ to filter). Thresholds can be in percentage or in free space remaining.
Traffic-Generic-Id Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Generic-Name Check the bandwidth of the interface. For each checks the name of the interface will appear (« label » shortcut describing the interface).
Traffic-Global Check the bandwidth of interfaces. For each checks the name of the interface will appear (« label » shortcut describing the interface).

Software monitoring

App-Backup-EMC-RecoveryPoint-SSH

Template to check RecoveryPoint Appliance using SSH protocol

Name Description
Monitored-Parameters Check monitored parameters by EMC RecoveryPoint appliance.
System-Status Check system status of EMC RecoveryPoint appliance.

App-Biztalk

Template to check a Biztalk Server

Name Description
Received-Locations-Disabled Check the number of biztalk received locations disabled.

App-DB-MSSQL

Template to check MSSQL Database

Name Description
Connection-Time Check the connection time to the server. This time is given in seconds.
Blocked-Processes Check blocked processes on the server. Service cannot work because of a SQL request. It depends of your MS SQL Server version.
Deadlocks Check deadlocks per second of the server.
Failed-Jobs Check MSSQL failed jobs.
Database-Used Check used space of databases on the server.
Connected-Users Check number of connected users on the database.
Backup-Age Check database backups of the server. This time is given in minutes.
Database-Free Check free space of databases on the server.
Cache-Hitratio Check the “Data Buffer Cache Hit Ratio” of the server. No alerts by default.
Transactions Check transactions per second of the server. No alerts by default.
Connected-Users Check number of connected users on the database.
Locks-Waits Check locks-waits per second of the server.

App-DB-MySQL

Template to check MySQL Database

Name Description
Connection-Time Check the connection time to the server. This time is given in seconds.
Connections-Number Check the number of open connections.
Database-Size Check size of databases. No Alerts by default.
Innodb-Bufferpool Check the hit rate of the InnoDB buffer.
Myisam-Keycache Check the hit rate of the MyISAM tables.
Slowqueries Check the number of slow queries since the last check. Gives the average rate per second.
Open-Files Check the number of files that currently are open.
Queries Check the average of queries per second.
Uptime This check indicates the operation time since the server is running. This time in given in minutes.
Long-Queries Check current number of long queries.
Qcache-Hitrate Check query cache hitrate.

App-DB-Oracle

Template to check Oracle Database

Name Description
Connection-Time Check the connection time to the server. This time is given in seconds.
Corrupted-Blocks Check the number of corrupted blocks on the server.
Tnsping Check the connection to a remote listener.
Tablespace-Usage Check the tablespace usage of the server.
Connection-Number Check connection number to the Oracle server.
Datacache-Hitratio Check the ‘Data Buffer Cache Hit Ratio’ of the server. No alerts by default.
Rman-Backup-Problems Check RMAN backup errors of the server during the last three days.
Session-Usage Check session used.
Process-Usage Check Oracle process used.
Connection-Time Check the connection time to the server. This time is given in seconds.
Corrupted-Blocks Check the number of corrupted blocks on the server.
Tnsping Check the connection to a remote listener.
Tablespace-Usage Check the tablespace usage of the server.
Connection-Number Check connection number to the Oracle server.
Datacache-Hitratio Check the ‘Data Buffer Cache Hit Ratio’ of the server. No alerts by default.
Rman-Backup-Problems Check RMAN backup errors of the server during the last three days.
Rman-Backup-Age Check RMAN backup age.
Rman-Backup-Online-Age Check RMAN backup age in online mode.
ASM-Diskgroup-Usage-Generic-Name Check ASM groupdisk usage and status to the Oracle server.
ASM-Diskgroup-Usage-Global Check ASM groupdisk usage and status to the Oracle server.
Data-Files-Status Check Oracle data files status.
Sql Check to execute custom SQL command.

App-DB-Postgres

Template to check Postgres Database

Name Description
Connection-Number Check connection number to the Postgres server.
Connection Check connection to the Postgres server.
Cache-Hitratio Check the “buffer cache hitratio” of the Postgres server.
Locks Check locks of the Postgres server.
Query-Time Check request time of the Postgres server.
Time-Sync Check time between poller and the Postgres server.
Tablespace-Size Check time between poller and the Postgres server.
Vacuum Check the execution of Vacuum on a DB for a given amount of days.
Statistics Check database statistics: commit, rollback, insert, delete, update.

App-DB-Sybase

Template to check Sybase Database

Name Description
Blocked-Processes Check blocked processes.
Connected-Users Check number of connected users on the database.
Connection-Time Check the connection time to the server. This time is given in seconds.
Database-Size Check used space of databases on the server.

App-Elasticsearch

Template to check an Elasticsearch Server

Name Description
Cluster-state Check the state of a elasticsearch’s cluster.
Node-count Check the number of nodes in an elasticsearch’s cluster.
Indices-state Check the state of indices of an elasticsearch’s cluster.

App-Exchange-2010-NRPE

Template to check Windows Exchange 2010 using NRPE protocol

Name Description
Activesync-Mailbox Check activesync to a mailbox.
Imap-Mailbox Check IMAP to a mailbox.
Mapi-Mailbox Check MAPI to a mailbox.
Owa-Mailbox Check OWA connection to a mailbox.
Queues Check queue status.
Exchange-Services Check exchange services.
Replication-Health Check replication health.
Outlook-Webservices Check outlook autodiscovery webservices.
Databases Check Exchange Databases.

App-Jenkins

Template to check Jenkins Server

Name Description
job-state Check the state of a job in jenkins.

App-Lm-Sensors-SNMP

Template to check LM Sensors using SNMP protocol

Name Description
Hardware-Fan Check fans sensors.
Hardware-Misc Check misc sensors.
Hardware-Temperature Check temperature sensors.
Hardware-Voltage Check voltage sensors.

App-Lync-2013-Mssql

Template to check MS Lync 2013 app through SQL queries

Name Description
Lync-User-Count Check number of users on a Lync frontend.
Lync-Video-Qoe Check Lync Video Qoe Metrics.
Lync-Audio-Qoe Check Lync Audio Qoe Metrics.
AppSharing-Qoe Check Lync App Sharing Qoe Metrics.
Lync-Session-Types Check number of sessions of each types in the last X minutes.
Lync-Poor-Calls Check number of poor calls globally and per user in the last X minutes.

App-Mail-Bluemind

Template to check Bluemind Server

Name Description
Bluemind-Process-Core Check bm-core process.
Bluemind-Process-EAS Check bm-eas process.
Bluemind-Process-HPS Check bm-hps process.
Bluemind-Process-IPS Check bm-ips process.
Bluemind-Process-LMTP Check bm-lmtpd process.
Bluemind-Process-MQ Check bm-mq process.
Proc-Postfix Check postfix process.
Bluemind-Process-Cyrus Check cyrus process.
Hprof-File Check the presence of hprof file.
Incoming-Mails Check incoming mails.

App-Monitoring-Centreon-Central

Template to check Centreon Central Server

Name Description
proc-centcore Check centcore process.
proc-crond Check crond process.
proc-httpd Check Apache process.
proc-ntpd Check NTP process.
proc-broker-rrd Check Broker RRD process.
proc-centengine Check centreon-engine process.
proc-sshd Check sshd process.
proc-broker-sql Check Broker SQL process.
Broker-Retention Check if there is some broker retention file (broker flow error).
proc-snmptrapd Check snmptrapd process.
proc-centreontrapd Check centreontrapd process.

App-Monitoring-Centreon-MBI

Template to check Centreon MBI reporting server

Name Description
DWH-db-content Check if the datawarehouse of the reporting server is up to date.
DWH-partitions Check if partitions of the reporting server datawarehouse are up to date.
proc-cbis Check the presence and the memory consumption of cbis process.
proc-mysql Check the presence and the memory consumption of mysql process.

App-Monitoring-Centreon-Poller

Template to check Centreon Poller Server

Name Description
proc-ntpd Check NTP process.
proc-centengine Check centreon-engine process.
proc-sshd Check sshd process.
proc-snmptrapd Check snmptrapd process.
proc-centreontrapd Check centreontrapd process.

App-Monitoring-Centreon-Database

Template to check Centreon Poller Server

Name Description
Partitioning Check if your MySQL partitions are up to date.

App-Peoplesoft-JMX

Template to check PeopleSoft application using JMX

Name Description
Peoplesoft-Sessions Check current open sessions.
Peoplesoft-Queue-Length Check queue length.

App-Protocol-BGP

Template to check BGP protocol

Name Description
Peers-State Check state of all BGP peer of an equipment.
Peer-State Check state of a specific BGP peer
Peer-State Check state of a specific BGP peer

App-Protocol-DNS

Template to check a DNS Server

Name Description
DNS-Request Check requests to a DNS server.

App-Protocol-FTP

Ttemplate to check several things on remote FTP Server

Name Description
FTP-Login Check connection on a remote FTP server with username and password.
FTP-Date Check date of files within a directory or a specific file on a remote FTP Server.
FTP-Commands Check several commands execution on a remote FTP server.
FTP-FilesCount Count files on a remote FTP directory (recursive or not).

App-Protocol-HTTP

Template to check an HTTP Server

Name Description
HTTP-Response-Time Check response time of a Wabpage.
HTTP-Expected-Content Check the presence of a string in a Webpage.
HTTP-Soap-Content Check soap content.
HTTP-Json-Content Check json content.

App-Protocol-LDAP

Template to check a LDAP Server

Name Description
LDAP-Login Check login to a LDAP server.
LDAP-Search Check search to a LDAP server.

App-Protocol-NTP

Template to check an NTP Server

Name Description
NTP-Response-Time Check response time of NTP server.

App-Protocol-SMTP

Template to check a SMTP Server

Name Description
SMTP-Login Check connection to a SMTP server.
SMTP-Message Check sending a message to a SMTP server.

App-Protocol-Ospf

Template to check OSPF protocol

Name Description
Neighbor Check OSPF neighbor statuses.

App-Protocol-Telnet

Template to check several things on remote Telnet Server

Name Description
Telnet-Scenario Check telnet remote connection with a scenario file.

App-Protocol-X509

Template to check a X509’s certificate

Name Description
X509-Expiration Check expiration date of a X509’s certificate.
X509-Issuer Check an element of the issuer name of a X509’s certificate.
X509-Subject Check an element of the subject name of a X509’s certificate.

App-Selenium-WAA

Template to check website through Selenium IDE

Name Description
Scenario-Selenium Check to execute remotely Selenium scenario and measure execution time
Scenario-Selenium Check to execute remotely Selenium scenario and measure execution time

App-VoIP-Asterisk

Template to check an Asterisk Server

Name Description
Asterisk-SNMP-Activecalls Number of active calls
Asterisk-SNMP-Externalcalls Number of calls on external trunk
Asterisk-Showpeers Check status of peers by SSH connexion
Asterisk-Activecalls Check the number of active calls by SSH connexion
Asterisk-Externalcalls Check the number of external calls by SSH connexion
Asterisk-Dahdistatus Check state of DAHDI physical link by SSH connexion

App-VoIP-XiVo

Template to check a Xivo Server

Name Description
Xivo-process-nginx Check nginx process.
Xivo-process-postgres Check postgres process.
Xivo-process-xivo-agentd Check xivo-agentd process.
Xivo-process-xivo-agid Check xivo-agid process.
Xivo-process-xivo-amid Check xivo-amid process.
Xivo-process-xivo-confgend Check xivo-confgend process.
Xivo-process-xivo-ctid Check xivo-ctid process.
Xivo-process-xivo-call-logd Check xivo-call-logd process.
Xivo-process-xivo-confd Check xivo-confd process.
Xivo-process-xivo-dxtora Check xivo-dxtora process.
Xivo-process-xivo-provd Check xivo-provd process.
Xivo-process-xivo-sysconfd Check xivo-sysconfd process.

App-Vtom-Restapi

Template to check VTOM using REST API

Name Description
Job-Status Check job status.

App-Weblogic-JMX

Template to check WebLogic Server using JMX

Name Description
Weblogic-Class-Count Check Java Class usage.
Weblogic-Memory-Detailed Check Java Memory Pools.
Weblogic-Memory Check Java Heap and NonHeap Memory usage.
Weblogic-Threads Check threads.
Weblogic-Work-Manager-Global Check Java ‘workManagers’.

App-Webserver-Apache-ServerStatus

Template to check Apache Server using Server Status webpage

Name Description
Apache-Requests Check request informations.
Apache-ResponseTime Check response time of ‘mod_status’ page.
Apache-SlotStates Check slot informations.
Apache-Cpuload Check Apache Cpuload.
Apache-Workers Check Apache busy processes.

App-IIS-NRPE

Template to check Windows IIS >= 7.x using NRPE protocol

Name Description
IIS-Services Check if the W3SVC,IISADMIN and WAS services are running.
ApplicationPools-Auto Check if auto-start application pools are in state “started”.
ApplicationPools-Generic-Name Check states of application pools.
WebService-Generic-Name Check performances of an IIS site.
WebServices-Global Check performances of IIS sites.

App-Webserver-Nginx-ServerStatus

Template to check Nginx Server using ‘stub_status_module’ webpage

Name Description
Nginx-ResponseTime Check response time of ‘stub_status_module’ page.
Nginx-Requests Check request informations.
Nginx-Connections Check current connections.

App-Webserver-Tomcat-JMX

Template to check Tomcat Server using JMX

Name Description
Tomcat-Memory Check Java Heap and NonHeap Memory usage.
Tomcat-Threads Check threads.
Tomcat-Memory-Detailed Check Java Memory Pools.
Tomcat-Load-Average Check system load average.
Tomcat-Fd-Usage Check number/percentage of file descriptors.
Tomcat-Cpu-Load Check JVM SystemCpuLoad and ProcessCpuLoad.
Tomcat-Class-Count Check Java Class usage.

App-Webserver-Tomcat6-Webmanager

Template to check Tomcat 6 Server using Tomcat Webmanager

Name Description
Tomcat-Requestinfo-Global Check tomcat metrics (request count, error count,...).
Tomcat-Traffic-Global Check traffic for each connectors.
Tomcat-Applications-Global Check status of tomcat applications.
Tomcat-Sessions-Global Check number of sessions per application.
Tomcat-Threads-Global Check threads for each connectors.
Tomcat-Memory Check Tomcat memory.

App-Webserver-Tomcat7-Webmanager

Template to check Tomcat 7 Server using Tomcat Webmanager

Name Description
Tomcat-Requestinfo-Global Check tomcat metrics (request count, error count,...).
Tomcat-Traffic-Global Check traffic for each connectors.
Tomcat-Applications-Global Check status of tomcat applications.
Tomcat-Sessions-Global Check number of sessions per application.
Tomcat-Threads-Global Check threads for each connectors.
Tomcat-Memory Check Tomcat memory.

Virtualisation monitoring

Virt-VMWare2-ESX

Template to check VMWare ESX Server using centreon-vmware connector

Name Description
Esx-Cpu-Generic Check CPU usage of an ESX Server.
Esx-Memory-Generic Check Memory usage of an ESX Server.
Esx-Swap-Generic Check if a virtual machine is swapping on the ESX server.
Esx-Health-Generic Check hardware and CPU sensors of an ESX Server.
Esx-Status-Generic Check global status of an ESX Server.
Esx-Traffic-Generic Check traffic usages of a physical network interfaces. Thresholds are in percent.
Esx-Datastores-Latency-Generic Check Datastores latency of an ESX Server.
Esx-Vm-Count-Generic Check virtual machines running/off/suspended on an ESX Server.
Esx-is-Maintenance-Generic Check maintenance mode of an ESX Server.
Esx-Uptime-Generic Get uptime in days of an ESX Server.
Datastore-Usage-Generic Check datastore usage.
Datastore-Io-Generic Check datastore usage in Kbps.
Datastore-Snapshots-Generic Check snapshots usage on a datastore.
Esx-Traffic-Global Check traffic usage of multiple physical network interfaces on multiple ESX servers. Thresholds are in percent.
Datastore-Iops-Generic Check average IOPs of a datastore.
ESX-Alarms-Generic Check alarms of an ESX host (red an yellow)..
Datastore-Vm-Count-Generic Check virtual machines running/off/suspended on a datastore.
Esx-Service-Generic Check services of an ESX Server.
Esx-Time-Generic Check time of an ESX Server.

Virt-VMWare2-VCenter-5

Template to check VCenter 5 using centreon-vmware connector

Name Description
Vm-Snapshot-Global Check snapshot age of multiple virtual machines (Vsphere 5).
Vm-Limit-Global Check limit definition (cpu, memory, disk) on multiple virtual machines.

Virt-VMWare2-VCenter

Template to check VCenter using centreon-vmware connector

Name Description
Vm-Tools-Global Check vmtools state of multiple virtual machines.
Datastore-Usage-Global Check multiple datastores usage.
Datastore-Iops-Global Check average IOPs of multiple datastores.
Datastore-Snapshots-Global Check snapshots usage on multiple datastores.
Vm-Thinprovisioning-Global Check if a virtual machine has a disk in mode ‘thinprovisioning’ or not.
Datastore-Io-Global Check datastore usages in Kbps.
Esx-Vm-Count-Global Check virtual machines running/off/suspended on multiple ESX Servers.
Esx-Cpu-Global Check CPU usage of multiple ESX Servers.
Esx-Datastores-Latency-Global Check Datastores latency of multiple ESX Servers.
Esx-Health-Global Check hardware and CPU sensors of multiple ESX Servers.
Esx-is-Maintenance-Global Check maintenance mode of multiple ESX Servers.
Esx-Memory-Global Check Memory usage of multiple ESX Servers.
Esx-Status-Global Check global status of multiple ESX Servers.
Esx-Swap-Global Check if a virtual machine is swapping on ESX servers.
Esx-Uptime-Global Get uptime in days of multiple ESX Servers.
Vm-Cpu-Global Check CPU usage of a virtual machine.
Vm-Datastores-Iops-Global Check datastores IOPS linked to virtual machines. (IOPS done by the virtual machine)
Vm-Memory-Global Check memory usage of virtual machines.
Vm-Swap-Global Check if virtual machines are swapping.
Datacenter-Alarms-Global Check datacenters alarms (red an yellow)..
Datacenter-Alarms-Generic Check alarms of a datacenter (red an yellow)..
ESX-Alarms-Global Check ESX hosts alarms (red an yellow)..
Vm-Status-Global Check global status of multiple virtual machines.
Datastore-Vm-Count-Global Check virtual machines running/off/suspended on multiple datastores.
Esx-Service-Global Check services of multiple ESX Servers.
Esx-Time-Global Check time of multiple ESX Servers.

Virt-VMWare2-VM

Template to check VMWare Virtual Machine using centreon-vmware connector

Name Description
Vm-Cpu-Generic Check CPU usage of a virtual machine.
Vm-Memory-Generic Check memory usage of a virtual machine.
Vm-Datastores-Iops-Generic Check datastores IOPS linked to the virtual machine. (IOPS done by the virtual machine)
Vm-Swap-Generic Check if a virtual machine is swapping.
Vm-Tools-Generic Check vmtools state of a virtual machine.
Vm-Snapshot-Generic Check snapshot age of a virtual machine.
Vm-Thinprovisioning-Generic Check if a virtual machine has a disk in mode ‘thinprovisioning’ or not.
Vm-Limit-Generic Check limit definition (cpu, memory) on a virtual machine.
Vm-Status-Generic Check global status of a virtual machine.

Virt-VMWare2-ESX-WSMAN

Template to check VMWare ESXi Server using wsman

Name Description
Hardware-Global Check ESXi hardware.

Hardware monitoring

HW-Device-Gorgy-Ntpserver-SNMP

Template to check Gorgy ntp servers.

Name Description
Global-Status Check global status.

HW-Pdu-Clever-SNMP

Template to check China Clever PDU.

Name Description
Power-Source-Usage Check power source usage.

HW-Pdu-Emerson-SNMP

Template to check an Emerson PDU

Name Description
Global-Status Check global status.
Power-Source-Usage Check power source usage.
Receptacle-Branch-Usage Check receptacle branch usage.

HW-Pdu-Raritan-SNMP

Template to check a Raritan PDU

Name Description
Outlet-Sensors Check PDU outlets.
Ocprt-Sensors Check PDU OCPRT sensors.
Outlet-Sensors Check PDU outlets.

HW-Printer-standard-rfc3805

Template to check printer according to RFC 3805

Name Description
Cover-Status Check Printer cover status based on components present in the “Cover” table of the rfc3805 mib.
Printer-Errors Check errors on printer like paper low or jammed.
Printer-Hardware Check several hardware health indicator through an unique service.
Impressions Check the number of impressions between two checks.
MarkerSupply-Usage Check marker supply usage.
PaperTray-Usage Check utilization rate of papertrays.

HW-Sensor-Akcp-SNMP

Template to check AKCP sensors using SNMP

Name Description
Sensors-Global Check all sensors of equipment.

HW-Sensors-HWgSTE-SNMP

Template to check HWg-STE sensors using SNMP protocol

Name Description
Sensors-Global Check all sensors of equipment.

HW-Sensor-Jacarta-SNMP

Template to check Jacarta sensors using SNMP

Name Description
Sensors-Global Check all sensors of equipment.

HW-Sensor-Netbotz-SNMP

Template to check APC NetBotz sensors using SNMP

Name Description
Sensors-Global Check all sensors of equipment.

HW-Sensor-Sensorip-SNMP

Template to check SensorIP equipments using SNMP

Name Description
Sensors-Global Check all sensors (global status, , temperatures, humidity, switch) of equipment.
Sensors-Temperature Check temperature sensors of equipment.
Sensors-Humidity Check humidity sensors of equipment.
Sensors-Sp Check sensor probe status of equipment.
Sensors-Switch Check switch sensors of equipment.

HW-Sensor-Sensormetrix-Em01-Web

Template to check Sensormetrix Em01 series using HTTP protocol

Name Description
Humidity Check humidity sensor.
Illumination Check illumination sensor.
Temperature Check temperature sensor.
Thermistor-Temperature Check thermistor temperature sensor.
Voltage Check voltage sensor.
Contact Check contact sensor.
Flood Check flood sensor.

HW-Sensor-Serverscheck-Sensorgateway-SNMP

Template to check Sensorgateway equipments using SNMP

Name Description
Sensors-Global Check all sensors of equipment.

HW-Server-Cisco-Ucs

Template to check Cisco UCS using SNMP protocol

Name Description
Audit-Logs Check audit logs.
Equipment Check hardware state.
Faults Check faults.
Service-Profile Check count of service profiles.

HW-Server-Dell-CMC-SNMP

Template to check Dell server through CMC using SNMP protocol (hardware example: m1000e)

Name Description
Hardware-Global Check all sensors (‘chassis’, ‘power supply’, ‘status’, ‘temperature’).
Uptime Time since the server has been working and available.

HW-Server-Dell-iDrac-SNMP

Template to check Dell server through iDrac card using SNMP protocol

Name Description
GlobalStatus Check global status of the equipment.

HW-Server-Dell-Openmanage-SNMP

Template to check Dell server using Openmanage using SNMP protocol

Name Description
Hardware-Global Check hardware (‘fan’, ‘cpu’, ‘power supply’, ‘temperature’, ‘battery’,...) of Dell Server.
Hardware-Globalstatus Check global status of Dell Server.
Hardware-Fan Check fans of Dell Server.
Hardware-Psu Check power supplies of Dell Server.
Hardware-Temperature Check temperatures of Dell Server.
Hardware-Cachebattery Check cache batteries of Dell Server.
Hardware-Memory Check memories of Dell Server.
Hardware-Physicaldisk Check physical drives of Dell Server.
Hardware-Logicaldrive Check logical drives of Dell Server.
Hardware-Esmlog Check event logs of Dell Server.
Hardware-Battery Check batteries of Dell Server.
Hardware-Controller Check controllers of Dell Server.
Hardware-Connector Check connector of Dell Server.
Hardware-Storage Check storage of Dell Server.

HW-Server-Hp-Bladechassis-SNMP

Template to check HP Blade Chassis using SNMP protocol

Name Description
Hardware-Global Check hardware (‘enclosure’, ‘manager’, ‘fan’, ‘blade’, ‘network’, ‘power supply’, ‘temperature’, ‘fuse’) of HP Blade chassis.
Hardware-Fan Check ‘fan’ hardware of HP Blade chassis.
Hardware-Enclosure Check ‘enclosure’ hardware of HP Blade chassis.
Hardware-Manager Check ‘manager’ hardware of HP Blade chassis.
Hardware-Blade Check ‘blades’ hardware of HP Blade chassis.
Hardware-Network Check ‘network’ hardware of HP Blade chassis.
Hardware-Psu Check ‘power supply’ hardware of HP Blade chassis.
Hardware-Temperature Check ‘temperatures’ hardware of HP Blade chassis.
Hardware-Fuse Check ‘fuse’ hardware of HP Blade chassis.

HW-Server-Hp-Server-SNMP

Template to check HP server through HP Insight Management agent using SNMP protocol

Name Description
Hardware-Global Check all hardware (‘cpu’, ‘fan’, ‘temperature’, ‘power supply’, ...).
Hardware-Fan Check fan hardware.
Hardware-Cpu Check cpu hardware.
Hardware-Psu Check power supply hardware.
Hardware-Pc Check power converter hardware.
Hardware-Temperature Check hardware temperatures.
Hardware-Network Check network hardware.
Hardware-Storage Check storage hardware.

HW-Server-IBM-Bladecenter-SNMP

Template to check IBM Bladecenter Chassis (H, HT, T, PureFlex) using SNMP protocol

Name Description
Hardware-Global Check hardware (ambient temperatures, blowers, power modules, system health, chassis tests) of IBM Bladecenter chassis.
Hardware-Blade Check ‘blades’ hardware of IBM Bladecenter chassis.
Hardware-Power-Module Check ‘power modules’ hardware of IBM Bladecenter chassis.
Hardware-Blower Check ‘blowers’ hardware of IBM Bladecenter chassis.
Hardware-Ambient Check ‘ambient temperatures’ hardware of IBM Bladecenter chassis.
Hardware-System-Health Check ‘system health’ hardware of IBM Bladecenter chassis.
Hardware-Chassis-Status Check hardware tests of IBM Bladecenter chassis.

HW-Server-IBM-IMM-SNMP

Template to check IBM server through IMM card using SNMP protocol

Name Description
Environment-Global Check all sensors (‘globalstatus’, ‘fan’, ‘temperature’, ‘voltage’) of IBM IMM card.
Eventlog Check eventlogs of IBM IMM card.
Environment-GlobalStatus Check ‘globalstatus’ sensor of IBM IMM card.
Environment-Temperature Check ‘temperature’ sensors of IBM IMM card.
Environment-Voltage Check ‘voltage’ sensors of IBM IMM card.
Environment-Fan Check ‘fan’ sensors of IBM IMM card.

HW-Server-Sun-Alom-TELNET

Template to check Sun server vXXX (v240, v440, v245,...) through ALOM card using Telnet protocol

Name Description
Hardware Check Sun vXXX (v240, v440, v245,...) Hardware (through ALOM).

HW-Server-Sun-Sfxxxx-TELNET

Template to check Sun server sfXXXX (sf6900, sf6800, sf3800,...) through ScpApp card using Telnet protocol

Name Description
Hardware Check Sun SFxxxx (sf6900, sf6800, sf3800,...) Hardware through ScApp.

HW-Server-Sun-V8xx-TELNET

Template to check Sun server v8xx (v890, v880) through RSC card using Telnet protocol

Name Description
Hardware Check Sun v890 and v880 Hardware through RSC card.

HW-Server-Sun-V4xx-TELNET

Template to check Sun server v4xx (v490, v480) through RSC card using Telnet protocol

Name Description
Hardware Check Sun v480 and v490 Hardware through RSC card.

HW-Server-Sun-Sf2xx-TELNET

Template to check Sun server sf280 through RSC card using Telnet protocol

Name Description
Hardware Check Sun sf280 Hardware through RSC card.

HW-Server-Sun-Alom4v-SSH

Template to check Sun server (T1xxx, T2xxx) through ALOM4v card using SSH protocol

Name Description
Hardware Check Sun ‘T1xxx’, ‘T2xxx’ ans ‘T5xxx’ Hardware through ALOM4v.

HW-Server-Sun-Ilom-SSH

Template to check Sun server (T3-x, T4-x, T5xxx) through ILOM card using SSH protocol

Name Description
Hardware Check Sun ‘T3-x’, ‘T4-x’ and ‘T5xxx’ Hardware through ILOM.

HW-Server-Sun-Ilom-IPMITOOL

Template to check Sun server (x4600, x4500, x4100,...) through ILOM card using IPMI protocol

Name Description
Chassis-Status Check Sun ‘x4600’, ‘x4100’,... global chassis status through ILOM.

HW-Server-Sun-Mseries-SSH

Template to check Sun server Mxxxx (M4000, M5000, M8000,...) through XSCF using SSH protocol

Name Description
Hardware Check Sun ‘Mxxx’ Hardware through XSCF.

HW-Server-Sun-Mseries-SNMP

Template to check Sun server Mxxxx (M4000, M5000, M8000,...) using SNMP protocol

Name Description
Hardware Check Sun mseries Hardware.
Domains Check status of sun domains.

HW-Server-Sun-Sfxxk-PSSH

Template to check Sun server sfxxk (sf12k, sf15k, sf20k, sf25k) using SSH protocol (no plugins on system controller)

Name Description
Failover-Status Check system controller failover status.
Boards Check Sun ‘sfxxk’ boards.
Environment Check Sun ‘sfxxk’ environment.

HW-Storage-Dell-Compellent-NRPE

Template to check Dell Compellent Storage using ‘Compellent Entreprise Manager’, ‘powershell sdk storage’ and NRPE

Name Description
Volume-Usage Check volume usages.
Hba-Usage Check hba usages.

HW-Storage-Dell-Compellent-SNMP

Template to check Dell Compellent Storage using SNMP protocol

Name Description
Hardware-Global Check hardware.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.

HW-Storage-Dell-Equallogic-SNMP

Template to check Dell EqualLogic Storage using SNMP protocol

Name Description
Hardware-Global Check hardware (‘fan’, ‘temperature’, ‘disk’, ‘raid’, ‘power supply’).
Pool-Usage-Global Check pool usages.
Disk-Usage-Global Check disk usages.
Array-Stats-Global Check global array statistics.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.

HW-Storage-Dell-MD3000-Cli

Template to check Dell MD3000 series using SMcli

Name Description
Health-Status Check storage health status.

HW-Storage-Dell-ML6000-SNMP

Template to check Dell ML6000 Tape Library using SNMP protocol

Name Description
Hardware-Global Check all hardware (global status, physical drive, subsytems).

HW-Storage-Dell-TL2000-SNMP

Template to check Dell TL2000 Tape Library using SNMP protocol

Name Description
GlobalStatus Check global status of the equipment.

HW-Storage-EMC-Clariion-Navisphere

Template to check EMC Clariion using Navisphere client

Name Description
Disks Check disks status and performances.
Hardware-Global Check all hardware status (fan, psu, cpu, memory, cable, io module, sp, lcc).
Cache Check cache state.
Controller Check global controller (busy usage, iops).
Faults Check faults on the array.
Port-State Check SP port state.
Hba-State Check connection state of servers.

HW-Storage-EMC-DataDomain-SNMP

Template to check EMC DataDomain using SNMP

Name Description
Hardware-Global Check all hardware (fans, power supplies, temperatures, disks, nvram batteries) of storage.
Filesystem-Global Check the rate of free space on filesystems.
Hardware-Fan Check fans of storage.
Hardware-Psu Check power supplies of storage.
Hardware-Disk Check disks of storage.
Hardware-Battery Check nvram batteries of storage.
Replication Check replication status.

HW-Storage-EMC-Isilon-SNMP

Template to check EMC Isilon using SNMP

Name Description
Hardware-Global Check hardware.
Cluster-Usage Check cluster usage.

HW-Storage-EMC-Vplex-Restapi

Template to check EMC Vplex using Rest API

Name Description
Directors Check directors state.
Cluster-Communication Check cluster communication state.
Cluster-Devices Check cluster devices health.
Distributed-Devices Check distributed devices.
Fans Check fan state.
Psus Check power supplies state.
Storage-Volumes Check cluster storage volume health.

HW-Storage-EMC-Xtremio-Restatpi

Template to check EMC Xtremio using Rest API

Name Description
Cluster-Health Check cluster state.
SSDs-Endurance Check SSDs life remaining in percent .
SSDs-Iops Check Iops on SSDs disks.
XenVS-CPU Check XenVS CPU usage.
XenVS-State Check XenVS State.

HW-Storage-Fujitsu-Eternus-DX-SSH

Template to check Fujitsu storage bay

Name Description
Cpu Check the rate of utilization of CPU of the bay.
Physical-Disk Check the state of the disks.
Port-Stats Check the state of the ports.
Psu Check the state of the power supply.
Raid-Groups Check the disks capacity.
Volume-Stats Check global health of the bay.
Cpu Check the rate of utilization of CPU of the bay.
Physical-Disk Check the state of the disks.
Port-Stats Check the state of the ports.
Psu Check the state of the power supply.
Raid-Groups Check the disks capacity.
Volume-Stats Check global health of the bay.

HW-Storage-Hitachi-Hnas-SNMP

Template to check Hitachi HNAS using SNMP protocol

Name Description
Volume-Usage-Global Check volume usages.
Hardware-Global Check all hardware.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.
Cluster-Status Check cluster nodes status.

HW-Storage-Hitachi-Standard-SNMP

Template to check Hitachi Data Systems (9990, df600,...) using SNMP protocol

Name Description
Hardware-Global Check all hardware.

HW-Storage-HP-3par-7000-SSH

Template to check HP 3par 7000 series storage arrays using SSH protocol

Name Description
Humidity Check humidity sensor.
Illumination Check illumination sensor.
Temperature Check temperature sensor.
Hardware-Fan Check fans sensors.
Hardware-Misc Check misc sensors.
Hardware-Temperature Check temperature sensors.
Hardware-Voltage Check voltage sensors.
Sensors-Global Check all sensors (global status, , temperatures, humidity, switch) of equipment.
Node Check nodes state.
Battery Check battery status.
Physical-Disk Check physical disks state.
Psu Check power supplies state.
Temperature Check temperature on several sensors.
Disk-Global Check used space on physical disks.
Volume-Global Check used space on volumes.
CIM Check CIM service status.
WSAPI Check WSAPI service status.
Disk-Id Check used space on physical disk.
Volume-Name Check used space on a volume.
Volume-Id Check used space on a volume.
ISCSI Check ISCSI mount points.

HW-Storage-Hp-Msa2000-SNMP

Template to check HP MSA2000 using SNMP protocol

Name Description
Hardware Check hardware state.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.

HW-Storage-Hp-P2000-Xmlapi

Template to check HP P2000 using XML API

Name Description
Health Check health state.
Volume-Stats-Global Check volumes statistics.
Volume-Stats-Name Check volume statistics.

HW-Storage-Hp-Storeonce-Restapi

Template to check HP Storeonce through Rest API.

Name Description
Cluster-Usage Check cluster status.
Serviceset-Usage Check service set usage.
Fcs-Usage Check federated catalyst store usage.

HW-Storage-Hp-Storeonce-SSH

Template to check HP Storeonce in SSH.

Name Description
Components Check components.

HW-Storage-IBM-DS3000-Cli

Template to check IBM DS3000 series using SMcli

Name Description
Health-Status Check storage health status.

HW-Storage-IBM-DS4000-Cli

Template to check IBM DS4000 series using SMcli

Name Description
Health-Status Check storage health status.

HW-Storage-IBM-DS5000-Cli

Template to check IBM DS5000 series using SMcli

Name Description
Health-Status Check storage health status.

HW-Storage-IBM-Storwize-SSH

Template to check IBM Storwize (v3700, v5000, v7000, SAN Volume Controller) in SSH.

Name Description
Eventlog Check eventlogs.
Components Check components (disks, port fc, node,...).
Pool-Usage-Global Check pool usages.

HW-Storage-IBM-TS3100-SNMP

Template to check IBM TS3100 Tape Library using SNMP protocol

Name Description
GlobalStatus Check global status of the equipment.

HW-Storage-IBM-TS3200-SNMP

Template to check IBM TS3200 Tape Library using SNMP protocol

Name Description
GlobalStatus Check global status of the equipment.

HW-Storage-Nimble-SNMP

Template to check Nimble Storage using SNMP protocol

Name Description
Volume-Usage-Global Check volume usages.
Global-Stats Check global storage statistics (IOPs, latency,...).

HW-Storage-NetApp-SNMP

Template to check Netapp Storage using SNMP protocol

Name Description
Cpu-Load Check CPU usage.
Disk-Failed Check the current number of disk broken.
Global-status Check the overall status of the appliance.
Nvram Check current status of the NVRAM batteries.
Shelf Check Shelves hardware.
Cp-Statistics Check consistency point metrics.
Cache-Age Check age in minutes of the oldest read-only blocks in the buffer cache.
Fan Check if fans are failed.
Ndmpsessions Check current total of ndmp sessions opened.
Psu Check if power supplies are failed.
Temperature Check if hardware is currently operating outside of its recommended temperature range.
File-System-Global Check filesystem usage.
Volume-Options-Generic Check options from volumes.
Partner-Status Check status of clustered failover partner.
Share-Calls Check cifs and nfs calls per seconds.
Snapshot-Age-Global Check snapshot age of volumes.
Snapshot-Age-Name Check snapshot age of volumes.
Aggregate-State-Global Check state of one or several aggregates.
Qtree-Usage-Global Check qtree quota usages.

HW-Storage-Overland-Neo-SNMP

Template to check Overland Neo Series using SNMP protocol

Name Description
Hardware-Global Check hardware.
Eventlog Check eventlogs.

HW-Storage-Panzura-SNMP

Template to check Panzura hardware using SNMP

Name Description
Traffic-Global Check traffic of multiple network interfaces.
Disk-Usage-Cloud-Global Check cloud disk usages.
Disk-Usage-Local Check local disk usage.
Memory Check the rate of the utilization of memory (RAM).
Cpu-Cloud Check usage of cloud controller CPU.
Cpu-Detailed Check the detailed rate of utilization of CPU for the machine.
Load Check the server load average.
Swap Check virtual memory usage (SWAP)
Ratios Check deduplication, compression and save ratios.
Traffic-Global Check traffic of multiple network interfaces.
Traffic-Global Check traffic of multiple network interfaces.
Traffic-Global Check traffic of multiple network interfaces.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Disk-Io-Generic-Name Check access disk of the disk. For each check the name of the disk will appear “label” rather than the letter assigned.
Disk-Io-Global Check access disk of disks
Disk-Usage-Cloud-Generic-Name Check cloud disk usage.
Packet-Errors-Generic-Id Check packets on errors/discards of a network interface.
Packet-Errors-Generic-Name Check packets on errors/discards of a network interface.
Packet-Errors-Global Check packets on errors/discards of multiple network interfaces.

HW-Storage-Qnap-SNMP

Template to check Qnap Storage using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Hardware-Global Check hardware (‘fan’, ‘temperature’, ‘disk’).
Memory Check the memory usage.
Volume-Usage-Global Check volume usages.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.
Disk-Global Check the rate of free space on disks. For each checks the mount point of disks will appear (« label »). Thresholds can be in percentage or in free space remaining.

HW-Storage-Quantum-Scalar-SNMP

Template to check Quantum Scalar Tape Library using SNMP protocol

Name Description
Hardware-Global Check all hardware.

HW-Storage-Storagetek-Sl-SNMP

Template to check StorageTek SL (SL150, SL500,...) using SNMP protocol

Name Description
Hardware-Global Check all hardware.

HW-Storage-Synology-SNMP

Template to check Synology Storage using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Hardware-Global Check hardware (‘fan’, ‘temperature’, ‘disk’, ‘raid’, ‘alimentation’).
Memory Check the memory usage.
Load Check the server load average.
Ups Check estimated battery life time.
Temperature Check temperature.
Disk-Global Check the rate of free space on disks. For each checks the mount point of disks will appear (« label »). Thresholds can be in percentage or in free space remaining.
Traffic-Generic-Id Check traffic of an network interface.
Traffic-Generic-Name Check traffic of an network interface.
Traffic-Global Check traffic of multiple network interfaces.

HW-Storage-Violin-3000-SNMP

Template to check Violin 3000 using SNMP

Name Description
Hardware-Global Check all hardware (Fans, Power Supplies, Temperatures, Chassis alarm, vimm, global fc, local fc) of storage.
Hardware-Fan Check fans of storage.
Hardware-Psu Check power supplies of storage.
Hardware-Chassis-Alarm Check chassis alarm of storage.
Hardware-Vimm Check vimm of storage.
Hardware-Temperature Check temperatures of storage.
Hardware-Global-Fc Check global fc of storage.
Hardware-Local-Fc Check local fc of storage.

HW-Telephony-Alcatel-OXE-SNMP

Template to check Alcatel OXE server using SNMP protocol

Name Description
Cpu Check the rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Memory Check the rate of the utilization of memory (RAM).
State Check the server state.
Domain-Usage Check the number of external calls by domain using SNMP
Swap Check virtual memory usage (SWAP)
Cpu Check the rate of utilization of CPU for the machine. This check can give the average CPU utilization rate and the rate per CPU for multi-core CPU.
Disk-Generic-Id Check the rate of free space on the disk. For each checks the name of the disk will appear (« label ») rather than the letter assigned. Thresholds can be in percentage or in free space remaining.
Disk-Generic-Name Check the rate of free space on the disk. For each checks the mount pont of the disk will appear (« label »). Thresholds can be in percentage or in free space remaining.
Disk-Global Check the rate of free space on disks. For each checks the mount point of disks will appear (« label »). Thresholds can be in percentage or in free space remaining.
Memory Check the rate of the utilization of memory (RAM).
State Check the server state.
Domain-Usage Check the number of external calls by domain using SNMP
Swap Check virtual memory usage (SWAP)

HW-UPS-Mge-SNMP

Template to check Merlin Gerin UPS using SNMP protocol

Name Description
Battery-Status Check battery status and battery charge remaining.
Input-Lines Check input lines metrics.
Output-Lines Check output lines metrics.
Output-Source Check output source status.
Environment Check humidity and temperature.

HW-UPS-Powerware-SNMP

Template to check Powerware UPS (Eaton) using SNMP protocol

Name Description
Environment Check humidity and temperature.
Battery-Status Check battery status and battery charge remaining.
Input-Lines Check input lines metrics.
Output-Lines Check output lines metrics.
Output-Source Check output source status.
Alarms Check if alarms present.

HW-UPS-Standard-Rfc1628-SNMP

Template to check UPS Hardware using rfc 1628 standard using SNMP protocol

Name Description
Alarms Check if alarms present.
Output-Source Check output source status.
Output-Lines Check output lines metrics.
Input-Lines Check input lines metrics.
Battery-Status Check battery status and battery charge remaining.